Display Protocol-Vlan Vlan - HP 6125G Command Reference Manual

display protocol-vlan vlan

Syntax
display protocol-vlan vlan { vlan-id1 [ to vlan-id2 ] | all } [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
vlan-id1: Specifies a protocol-based VLAN ID, in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays protocol-based VLAN information of a VLAN range from vlan-id1 to
vlan-id2. vlan-id1 and vlan-id2 represent VLAN IDs and each range from 1 to 4094. The vlan-id2
argument cannot be smaller than the vlan-id1 argument.
all: Displays information about all protocol-based VLANs.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display protocol-vlan vlan to display the protocols and protocol indexes configured on the specified
VLANs.
Related commands: display vlan.
Examples
# Display the protocols and protocol indexes configured on all protocol-based-VLANs.
<Sysname> display protocol-vlan vlan all
VLAN ID:2
Protocol Index
======================================================
VLAN ID:3
Protocol Index
======================================================
Protocol Type
0 ipv4
3 ipv6
Protocol Type
0 ipv4
1 ipv6
157