1.04 Operation Mode
This mode is for confirming and changing the
password level, system maintenance and monitor
etc. except the programming for the system data.
Operation
mode prompt
Pre-entering mode
; Select the mode
; Programming mode -------- PRG
; Operation mode
; (displays command information-- HLP)
; >
After entering OPE, press RETURN.
Operation mode
; OPE >
For details about operation in the Operation
mode, refer to Section 8-E-2.00 "Operation
Mode."
8-B-3
The following flow chart illustrates the procedures
for advancing the mode from "Pre-entering mode"
to "Operation mode."
------------ OPE