Panasonic KX-T336 System Reference Manual page 746

3.00 Directed Call Pickup
Description
Directed Call Pickup allows the attendant to
answer the call ringing at any extension by
dialing the feature number for "Directed Call
Pickup," and then the directory number of the
ringing extension.
Programming
System Programming
"System-Numbering Plan
(03/11)",
Directed Call Pickup
Conditions
It is possible to execute Directed Call Pickup
after holding the current call.
This feature is not available to answer the
following calls:
<1> A call ringing at an extension on which Dial
Call Pickup Deny is set
(Refer to Section 4-D-3.03 "Call Pickup
Deny" for further information.)
<2> A call ringing on PCO button
<3> A call ringing on ICM button
<4> A call arriving at an extension but not ringing
(Refer to Section 3-D-3.02 "Flexible Ringing
Assignment-Delayed Ringing" for further
information.)
For the above calls, reorder tone sounds after
dialing the feature number for "Directed Call
Pickup" and the directory number of the ringing
extension and the following message appears on
the Message line.
Message: No Incoming Call
Reference
VT Dumb
9-D-6.03 10-C-10.00
6-E-3
(70695)
Operation
Picking up a call ringing at an extension
1. Press an idle LOOP key.
LOOP
• The SRC indicator lights and
dial tone sounds.
2. Dial the feature number for
Directed Call Pickup. "48"
(default).
3. Dial the directory number of the
ringing extension.
• You hear confirmation tone 3.
• Talk to the caller.