Panasonic KX-T336 System Reference Manual page 874

12.00 SET Function (F8)
Description
Enables you to add or delete office codes without
moving the cursor to the code position. It also
enables you to designate wide range of codes.
This function is effective in the "Toll Restriction-
Office Code Tables" and "Automatic Route
Selection-Office Code Tables."
Operation
<Example 1>
Adding office code 200 in Toll Restriction Office
Code Table
Toll Restriction-Office Code Table
Office Code Table No.=01 (1/4)
2 Hundred Office code
,01,02,03 --- 09
10,11,12,13 --- 19
20,21,22,23 --- 29
1 COMMON 2 INDEX 3 COPY 4
Adding office code 200
F8
1. Press the F8 key.
SET>Set Office code No. (200-999)
1 2 3 4
2. Enter the office code number 200.
SET>Set Office code No. (200-999) =200
1 2 3 4
( for U.S.A. and Canada only)
5 6 HRD CPY 7 8 SET
(Y:yes/N:no)
5 6 7 EXIT 8
2 0 0
(Y:yes/N:no)
5 6 7 EXIT 8
(60395)
3. Move the cursor to the right by using "
and depress Y.
SET>Set Office code No. (200-999) =200 (Y:yes/N:no) Y
1 2 3
4. Press the RETURN key.
Toll Restriction-Office Code Table
2 Hundred Office code
00,01,02,03 --- 09
10,11,12,13 --- 19
Office code 200 is added
• "00" appears on the screen and Office code
200 is added. Also the message below
appears to show that the code 200 is added
properly:
***** OK
7-J-20
Y
4 5 6 7 EXIT
RETURN
Office Code Table No.=01 (1/4)
",
8