Panasonic KX-T336 System Reference Manual page 1023

When selecting "1. CO Line" in Trunk submenu screen, the setting screen which has
the smallest Trunk Equipment No. appears on the screen first.
If the "Group-Trunk Group" containing the CO line has "Type" assigned to "DID," the
following items cannot be entered : " —" is displayed :
• Direct Termination
• Night Answer Point (Type : No)
• Dial Mode
• DTMF Duration Time
• Pulse Speed
• % Break
• CPC Detection
If "the Group-Trunk Group" containing the CO line has "Type" assigned to anything
other than "DID" or "TIE", the following items cannot be entered : " —" is displayed :
• Start Arrangement
• Wink Signal Time-Out
Direct Termination
Night Answer
Point (Type : No)
When pressing the NEXT key, this screen appears in ascending order of Trunk
Equipment number. After the largest number appears, the smallest one appears.
Pressing the PREV key changes the screen in reverse order.
Function
The following functions appear on the function line of this setting screen.
1 COMMON 2 INDEX 3
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in all setting screens. INDEX and READ keys are also available in this
screen. The operation of function keys are described in Section 7-I "Operation of
Function Keys." Only messages are provided here.
INDEX>Trunk Equipment No. (Physical No.)=
:
F2
1 2
READ>Physical No.=
:
F4
1 2
This is assignable only when the "Group-Trunk Group" containing the CO
line has "Incoming Mode (Day)" assigned to "DIL 1:1," Otherwise, " —" is
displayed and setting is impossible.
This is assignable only when the "Group-Trunk Group" containing the CO
line has "Incoming Mode (Night)" assigned to "FIXED" or "FLEXIBLE."
Otherwise, " —" is displayed and setting is impossible.
4 READ 5 6 HRD CPY 7
3 4 5
3 4 5
9-F-4
(70695) (60395)
8
6 7 EXIT 8
6 7 EXIT 8