Panasonic KX-T336 System Reference Manual page 1362

9.03 Checking/Clearing the Charge Meter–Extensions
Used to check and/or clear the charge meter of each extension.
Operation
1. Set Charge Management
Mode.
2. Enter "0."
3. Enter extension directory
number.
4. Press SELECT to check the
rate.
• To alternate between the rate
and the meter press SELECT.
To reset the meter:
5. Press CLEAR
6. Press MEMORY to store the
data change.
To check/clear another
extension:
7. Press PREV.
or
Press NEXT.
To finish the programming:
8. Press END
Result
• Charge Meter
• EXT No.?
<Example>
100: 0000
DN 100
<Example>
100: 00005.
100: 00001.15DM
<Example>
100: 00000
• The MEMORY indicator lights
in red.
• EXT No.?
• Charge meter of the next
extension directory number is
displayed.
<Example>
101: 00008
• PITS–PGM No?
Initial Display of PITS Station
Programming Mode.
12-C-35
(70695)
Comment/Note
• Refer to Section 12-C-9.02
"Entering Charge Management
Mode."
• You can press NEXT to go to
the lowest directory number.
• Repeat steps 3 through 7.
• Repeat steps 4 through 7.