Panasonic KX-T336 System Reference Manual page 1173

18.00 CO Line (COL)
Description
To assign parameters on a CO line basis. DATA ERROR
appears on the entry of parameters if no trunk card is
assigned in the Slot Assignment (SLA) programming.
(Password level : Three or higher)
Input Format
C O L
Mode
Index Number
Index Number
Four digit numbers (1011 to 3158)
Input Value for Item Number
Item
Assigning Items
Number
01 Trunk Group
02 Trunk Name
03 Direct Termination
04 Night Answer Point
(Type : No.)
05 Dial Mode
06 DTMF Duration Time
Pulse Speed
07
(
Item Number
Index Number
01 to 16 : trunk group number
Maximum ten digits consisting of letters, numbers and marks
(Enclose the name with double quotes ".)
DN XXXX(XXXX : three or four digits) : extension number
0 : none
(Not assignable when the Trunk Group type is DID, PVL or TIE,
or Incoming Mode (Day) is set to any mode except DIL 1:1)
DN XXXX(XXXX : three or four digits) : extension number
U1: universal night answer 1
U2: universal night answer 2
0 : none
R : Remote Administration
N : Night Answer Group Extensions
(Not assignable in case of DID, TIE, or PVL, or outgoing only)
1 : DTMF mode
2 : Pulse mode
3 : MFC-R2 mode
1 : 80 ms
2 : 160 ms
(Not assignable when the dial type is pulse)
1 : low (10 pps)
2 : high (20 pps)
(Not assignable when the dial type is DTMF)
10-C-34
(70695)
)
CR
Explanation
Physical number of the CO line
Input Value
Continued