Panasonic KX-T336 System Reference Manual page 1393

Display Example To change the extension number "1000," name "James,"
department "Sales" to "1000, White, Product" :
Conditions An extension number can be three or four digits.
An extension name can be up to 16 characters including letters,
numbers and special characters (except ", *, /, ~), and the first digit
should be a letter.
A department can be up to eight characters including letters,
numbers and special characters (except ", *, /, ~), and the first digit
should be a letter.
Make sure not to leave a space within a sub command.
For example, if you enter: SET 1000/James/Sales
Div 4, an error message appears on the screen and you cannot
change the data.
In this case use special characters such as "-" to separate words as
"Div-4.".
Usage of Wild Card Character
One character "*" can be used as a wild card character which
substitute any character in that position.
The wild card character cannot be used for sub parameters of new
data.
<Example 1>
If the following entries are stored:
DIC > SET 1000/James/Sales 1000/White/Product
source data
No. Ext name
1000 James
Total 1 entry
*****
Set complete
*****
(1) (2) (3)
APPEND DELETE LIST
No.
100
101
exchanged data
Dep No.
Sales 1000 White
(4) (5)
SET HELP
( )
C
R
Dep
Ext name
Betty Project
Jack Project
13-B-10
Ext name Dep
Product
(6) (7) (8)
INIT END
( )
C
R
1001/James/
( )
C
R