Panasonic KX-T336 System Reference Manual page 804

12.00 Intercept Routing-No
Answer (IRNA)
Description
If an incoming CO call is not answered in a
specified period, or if a held incoming CO call is
not answered in a programmed period after Held
Call Reminder or Unscreened Call Transfer
Recall or Unattended Conference Recall, the calls
can be transferred to an Attendant Console
programmed.
The destination of Intercept Routing during day
and night are assigned in "Group-Trunk Group",
Intercept Routing (Day) and Intercept Routing
(Night) on a trunk group basis.
Set the time taken to start Intercept Routing in
"System-System Timer", Intercept Routing Time-
Out (System) and Intercept Routing Time-Out
(DISA) for DISA calls.
For details of DISA, refer to Section 3-D-2.02
"Direct Inward System Access (DISA)".
Programming
System Programming
"Group-Trunk Group",
Intercept routing (Day)
Intercept routing (Night)
"System-System Timer",
Intercept Routing Time-Out
(System)
Intercept Routing Time Out
(DISA)
Conditions
Intercept Routing-No Answer works for the
following incoming CO calls.
1. All incoming CO calls other than calls
placed on DIL1 : N, Private CO, Attendant
Consoles, Remote and UCD
2. Transfer Recall calls (except those to
Attendant Consoles)
3. Held Call Reminder calls (except those to
Attendant Consoles, calls on Exclusive
Hold, calls on hold on Private CO lines)
4. An incoming outside call routed via DISA/
DID which comes in on an extension in
DND mode.
Call Forwarding and Do not Disturb are not
effective for this function.
If the destination is not currently available to
receive the transferred call, Intercept Routing
does not work. However, Hunting function
becomes active, if programmed.
If the destination extension of direct dialing-in CO
calls is in the data line security mode, IRNA
feature does not work on it.
Refer to Section 4-I-6.00 "Data Line Security" for
further information.
Operation
Answering an incoming call from trunk, un-
screened call transfer recall, Held Call Reminder,
or call park recall
Reference
VT Dumb
9-E-1.01 10-C-14.00
9-D-3.00 10-C-6.00
Answering Unattended Conference Recall
6-J-26
(30393)
1. The SRC indicator is flashing.
DES
SRC
LOOP
2. Answer the incoming call by
pressing the ANSWER key or the
ANSWER
LOOP key.
• The SRC indicator of the LOOP
key changes from flashing to
LOOP
being lit.
1. Both SRC, DES indicators are
DES
flashing (SRC, DES are both CO
SRC
lines).
LOOP
2. Answer the calls by pressing the
ANSWER key or the LOOP key.
ANSWER
• Both SRC, DES indicators of
the LOOP key change from
flashing to being lit.
LOOP
3. Conference call is established.
Begin speaking.
• If conference trunk or AGC
trunk is not available, the SRC
side party is held and conversa-
tion continues on the DES side.