Panasonic KX-T336 System Reference Manual page 752

1.02 Call Transfer by Camp-on to
Station
Description
Allows the attendant to transfer a call to busy
extension.
Transferred call will ring the busy extension
automatically when it becomes idle.
Programming
System Programming
"System-System Timer",
Transfer Recall
Conditions
Busy status of PITS telephone means all PDNs
on the destination extension are in use.
If Camp-on Transfer cannot be set (for example,
the destination extension is in program mode),
the following message appears on the message
line on the screen:
Message: Camp-on deny.
If camped on call is not answered in preassigned
interval, transfer recall starts at the attendant
console.
The time taken to activate transfer recall is set by
"System-System Timer", Transfer Recall.
Reference
VT Dumb
9-D-3.00 10-C-6.00
6-G-2
Operation
During a conversation with an outside party or
extension. The SRC indicator is lit.
1. Press the HOLD key.
HOLD
• The SRC indicator starts to
flash in 60 wink, and the DES
indicator lights.
2. Dial the extension number of the
destination.
• Busy tone sounds on DES side
of the LOOP key.
3. Press the RELEASE key.
RELEASE
• Both SRC and DES indicator
lights go out and the attendant
console becomes silent.
• Transferred party is placed on
hold until the destination
extension answers.
• Ringing starts at the
destination extension, as soon
as it becomes idle.
If the destination answers,
conversation with the
transferred party starts.