Panasonic KX-T336 System Reference Manual page 1320

10.00 Setting Charge Management ID Code
Used to set/change Charge Management ID code (See Section 3-F-19.00 "Charge Management").
Operation
1. Set PITS system programming
mode.
2. Enter "08" (program number)
3. Press NEXT.
4. Enter four digits ID code: 0000
through 9999.
5. Press MEMORY to store the
entry.
6. To finish the programming, press
END.
Result
• SYS-PGM No? →
• The MEMORY indicator lights in
red.
• Charge ID Code
• The MEMORY indicator goes out.
• Code: 1234
<Example>
Code: 3939
• The MEMORY indicator lights in
red.
• Confirmation tone sounds.
• SYS-PGM No? →
• Initial Display of PITS System
Programming Mode.
11-C-21
(70695)
Comment/Note
• Refer to Section 11-C-
1.00 "Entering PITS
System Programming
Mode."
• Default: 1234
• To correct the current
entry, press CLEAR and
enter the new value
again.