Automatic Transfer - Panasonic KX-T336 System Reference Manual

12.01 Automatic Transfer

Description
Allows the DSS console operator to transfer the
CO call to an extension user by simply pressing
the associated DN•DSS button on the DSS
console.
This performance is, as a result, equivalent to the
operation of Call Transfer of a CO call to an
extension on a DN button.
To execute Automatic Transfer, assign "System-
Operation", DSS Operation Mode to "With
Transfer."
Default is set to "With Transfer."
If DSS Operation Mode is set to "Without
Transfer," pressing the DN•DSS button
disconnects the other party and only calls the
extension user.
Programming
System Programming
"System-Operation (1/3)",
DSS Operation Mode
Conditions
Automatic Transfer is effective only during a
conversation with an outside party when the DSS
console does not have a call on Consultation
Hold.
If the DSS console has a call on Consultation
Hold, the system ignores the pressing of the
DN•DSS button.
Reference
VT Dumb
9-D-1.01 10-C-4.00
4-I-24
Pressing the DN•DSS button in the following
modes causes the corresponding operations.
Modes of call Operations caused by
pressing the DN•DSS button.
Talking to an Calls the extension by
outside party placing the current call on
on the DN Consultation Hold.
button
Talking to an Calls the extension by
extension on disconnecting the current
the DN button call.
Talking on the By placing the current call on
CO button Consultation Hold, selects
the DN button automatically,
and calls the extension.
Talking on the By disconnecting the current
ICM button call, selects the DN button
automatically, and calls the
extension.
1 : If it is impossible to place the current call on
Consultation Hold, the system ignores the
pressing of the DN•DSS button.
2 : If there is no idle PDN button, the current
call is placed on Consultation Hold and no
tone sounds.
3 : If there is no idle PDN button, the current
call is disconnected and no tone sounds.
Music on Hold will be sent to the held party if
available. For sending Music on Hold, prior
assignment is necessary. Refer to Section
3-E-1.00 "Music on Hold" for further information.
Operation
During a conversation with an outside party
1. Press the DN•DSS button on the
DSS Console.
• As soon as the other party is
placed on Consultation Hold,
extension calling starts and
ringback tone sounds.
1
1
2
3