64.03 Master Clock Priority (CLP) — T-1/E-1
Description
Used to decide to which external clock pulse the system synchronizes,
when multiple T-1/E-1 cards are installed.
(Password level : Two or higher)
Input Format
C
L
P
Mode (SH/AT/BT)
Index Number
None
Input Value for Item Number
Item
Assigning Items
Number
1 to 6
Priority 1 to 6
Note:
• You have to assign this item even if only one T-1/E-1 card is installed.
Conditions
When more than two T-1/E-1 cards are installed in the system, each of them should be registered by this
command.
↵
Item Number
CR
T-1
/E-1
card physical slot number (three digits number)
(Default = None)
10-C-112
(70695)
Input Value