Panasonic KX-T336 System Reference Manual page 1392

5.00 SET Command
Description Used to correct or change the entries registered in the Extension
Directory.
Input Format Basic format for SET command is to enter:
DIC>SET [original data] [new data].
There are 10 types of input formats for it as shown below.
The < > mark in the table indicates that the data in the < > may be
skipped.
The
10
Input Example To change the department from "Sales" to "Account" for the
extension number "1000," name "Jack," department "Sales," enter :
To change the entry which has the extension number "1001," name
"Betty," no department to the extension number "2000," name
"Smith," department "Account," enter :
mark in the table indicates a space.
Contents
1 Specifies extension number, name, department
2 Specifies extension number, name (for data
which has no department stored)
3 Specifies extension number, name (regardless
of department)
4 Specifies extension number, department (for
data which has no name stored)
5 Specifies extension number, department
(regardless of name)
6 Specifies name, department (regardless of
extension number)
7 Specifies extension number only
8 Specifies name only
9 Specifies department only
Changes all entries
DIC > SET 1000/Jack/Sales 1000/Jack/Account
DIC > SET 1001/Betty/
DIC>SET
Department
<Department>
DIC>SET
<Number>/<Name>/<Department>
DIC>SET
<Number>/<Name>/<Department>
DIC>SET
<Number>/<Name>/<Department>
DIC>SET
<Number>/<Name>/<Department>
DIC>SET */Name/Department
<Number>/<Name>/<Department>
DIC>SET
<Name>/<Department>
DIC>SET
<Name>/<Department>
DIC>SET
<Number>/<Name>/<Department>
DIC>SET
<Department>
2000/Smith/Account
13-B-9
Format
Number /Name/
<Number>/<Name>/
Number /Name/
Number /Name/*
Number //Department
Number /*/Department
Number /*/* <Number>/
*/Name/* <Number>/
*/*/Department
*/*/* <Number>/<Name>/