Panasonic KX-T336 System Reference Manual page 1168

15.00 Trunk Group 2 (TG2)
Description
This is the second block to assign various data
for trunk groups.
(Password level: Two or higher)
Input Format
T G 2
Mode
Index Number
Index Number
01 to 16
Input Value for Item Number
Item
Assigning Items
Number
01 Destination (DIL 1: N Only)
to
08
09 DID Digit Modification Table
10 PBX Access Code
to (No Restriction)
17
18 PBX Access Code
to (Restriction)
25
26 Max. Dial No.
after EFA Signal
27 CO-TIE Restriction
28 TIE-CO Restriction
(
Index Number Item Number
I X (X : 1 to 8): ICM group number
P XX (XX : 01 to 32) : pickup group number
DN XXXX (XXXX : three or four digits): extension number
0 : none
(Assignable only when "Incoming Mode (Day)" is set to
DIL 1: N)
1 to 4 : table number
(Assignable when the Trunk Group type is DID)
Maximum three digit numbers
(Assignable when the Trunk Group type is PBX, and CO
line access is both way)
Maximum three digits of numbers
(Assignable when the Trunk Group type is PBX, and CO
line access is both way)
01 to 32: maximum dialing digits
00: cannot dial after external feature access
Y : CO-TIE connection is restricted
N : CO-TIE connection is allowed
Y : TIE-CO connection is restricted
N : TIE-CO connection is allowed
10-C-31
(70695)
)
CR
Explanation
Trunk group number
Input Value
CLR