Panasonic KX-T336 System Reference Manual page 430

4.04 Incoming Call Source Display
Description
If the user of a PITS provided with the display is
called by somebody, the user can see the name, if
pre-assigned, of the calling party on the display.
The display contents differ according to the type of
arriving calls as illustrated below:
When called by an extension using the DN button :
1 2 3 4: Tony
When called by an extension using the ICM
(intercom) button :
ICM12: Tony
When called by an outside party :
CO: PANASONIC
A station name or a trunk name does not appear
unless they are assigned in "Extension-Station",
Station Name or "Trunk-CO Line", Trunk Name.
Programming
System Programming
"Trunk-CO Line", Trunk Name
"Extension-Station (1/3)"
Station Name
Conditions
None
Operation
None
station name
directory number
station name
intercom number
trunk name
trunk group name
Reference
VT Dumb
9-F-1.00 10-C-18.00
9-G-1.01 10-C-22.00
4-A-22
4.05 Station Programmed Data Display
Description
When a PITS provided with the display is on-hook
and the SP-PHONE button is off, pressing the
following buttons provides the display of the kind
of the pressed button or the content assigned to
the button on the display for five seconds:
• REDIAL or LNR (Last Number Redial) button
• SAVE or SNR (Saved Number Redial) button
• MESSAGE (Message Waiting) button
• PF (Programmable feature) buttons
• FWD/DND (Call Forwarding/Do Not Disturb)
button
Programming
None
Conditions
When the assigned data exceeds 16 characters,
"&" appears on the most right side of the display.
Operation
Press the button to be confirmed.