Panasonic KX-T336 System Reference Manual page 805

13.00 Remote Timed Reminder
– One Time
Description
Allows the Operator 1 or 2 (Attendant Console or
PITS with display) to set "Timed Reminder"
feature to any extension.
(Refer to Section 4-I-3.00, 5-G-3.00 "Timed
Reminder.")
If Timed Reminder with OGM is programmed
beforehand, the extension user can hear the
wake-up message.
(Refer to Section 3-F-13.00 "Timed Reminder
with OGM (Wake-up Call).")
Programming
System Programming
"System-Numbering Plan
(09/11)",
Remote Timed Reminder
Confirm
Remote Timed Reminder
Set
Remote Timed Reminder
Cancel
Conditions
(1)The difference between "Timed Reminder"
and "Remote Timed Reminder" is:
Setting
Timed by extenison
Reminder itself
Remote by Operator
Timed 1 or 2
Reminder
(2)At a single extension, only the latest setting is
valid whether it was set by the extension itself
(Timed Reminder) or by the Operator 1 or 2
(Remote Timed Reminder).
Reference
VT Dumb
9-D-6.09 10-C-10.00
Validity of the
setting
Once or
everyday at the
programmed
time
Once
6-J-27
(70695)
Operation
Setting Timed Reminder to an extension
1. Press an idle LOOP key.
LOOP
• The SRC indicator lights and dial
tone sounds.
2. Dial the feature number for
Remote Timed Reminder Set "7
1" (default) and the extension
number to be set Timed Reminder
in succession.
3. Dial "hour" with two digits: 01 to 12.
4. Dial "minute" with two digits: 00 to
59.
5. Dial "0" for a.m. or dial "1" for p.m..
• The LOOP key is released
automatically and the following
message appears on the
Message line.
Message: Alarm Ext. 100 10:00 AM