Panasonic KX-T336 System Reference Manual page 1336

Operation
• To assign Ringing Transfer
feature, dial "8."
• To assign Call Splitting
feature, dial "9."
• To assign Call Forwarding /Do
Not Disturb (FWD/DND)
feature, dial "0."
• To assign Tone Through
*
Break feature, dial "
• To assign Saved Number
Redial (SNR) feature, dial "#."
4. Press the MEMORY button to
store the assignment.
5. To conclude PITS station
programming mode, slide the
MEMORY switch on the PITS
to "SET."
SET• • PROGRAM
MEMORY
Result
• The following message
appears on the display:
M01/P : RING TRNS
• The following message
appears on the display:
M01/P : Split
• The following message
." appears on the display:
M01/P : Tone Break
• The following message
appears on the display:
M01/P : SNR
• The MEMORY button indicator
lights in red.
• Confirmation tone sounds.
• "Initial display for PITS
station programming mode" is
displayed again.
• PITS station programming
mode is concluded and returns
to operation mode.
• This feature is assignable only
to the PF3 button of PITS type
50.
Refer to Section 4-A-2.01
"Location of Feature Buttons"
for further information.
• This feature is assignable only
to the PF1 button of PITS type
50, KX-T7020 and KX-T7030.
12-C-9
Continued
Comment/Note