Panasonic KX-T336 System Reference Manual page 1167

Item
Assigning Items
Number
14 Pause Time
15 Hook Switch Flash Time
Conditions
The assigning items:Type, Incoming Mode (Day/Night), Destination (DIL 1:N Only)
and Type and Number can be changed only when all the trunks belonging to the
trunk group are not in use. If any trunk is used, it is impossible to change.
Item
Number
Tenant
03
Incoming/Outgoing
04
Incoming Mode
05
(Day)
Incoming Mode
06
(Night)
Dialing Plan
11
For the relation between trunk group/CO line setting and PITS DN button setting,
refer to Section 9-E-1.01 "Trunk Group (1/2)."
1 : 1.5 s
2 : 2.5 s
3 : 3.5 s
4 : 4.5 s
0 : none
1 : 80 ms
2 : 300 ms
3 : 600 ms
4 : 900 ms
5 : 1200 ms
If " " is displayed here, "Operation (OPR)", Tenant Service is set to "N
***
(No)."
When "Incoming Only" is selected in the trunk group with DID, the following
items are assignable but they do not work at all in Incoming Only mode.
• Disconnect Time
• Pause Time
• Hook Switch Flash Time
• Max. Dial No. after EFA Signal
For further information, refer to "3. Other Conditions" on page 9-E-7.
Refer to Section 9-E-1.01 "Trunk Group (1/2)."
If "2 (Fixed)" or "3 (Flexible)" is changed to another option, it cancels all the
settings of CO lines in "CO Line (COL)", Night Answer Point (Type: No.)
which belong to the trunk group.
If "2 (Fixed)" is changed to "3 (Flexible)" and vice versa, the Night Answer
Points are not canceled.
Refer to Section 9-E-1.01 "Trunk Group (1/2)."
10-C-30
(70695)(F)
Input Value
: clearing function is effective
for the item
Continued
CLR