9.11 Setting Account Codes
Used to set a new account code for charge management feature.
Operation
1. Set Charge Management
Mode.
2. Enter "8."
3. Enter an account code location
number: 001 through 200.
4. Enter a new account code: up
to five digits
5. Press MEMORY to store the
entry.
6. Press END
Result
•
Charge Meter
•
Account Code?
<Example>
001: 23456
If not stored:
001: Not Stored
<Example>
001: 10001
• The MEMORY indicator lights
in red.
• Confirmation tone sounds.
•
PITS–PGM No?
Initial Display of PITS Station
Programming Mode.
12-C-46
(70695)
Comment/Note
• Refer to Section 12-C-9.02
"Entering Charge Management
Mode."
• You can press NEXT to enter
001.
• Press CLEAR to delete the
current entry and enter the
new one.