Panasonic KX-T336 System Reference Manual page 457

4.05 Saved Number Redial (SNR)
Description
Saved Number Redial allows the extension user
to store the telephone number of the outside
party when the called line is busy or during a
conversaion and make the same call again by
simply pressing the dedicated feature button:
SAVE or SNR button.
Programming
None
Conditions
Up to 32 digits of a dialing number can be stored
for this function, not counting the feature number
for selecting a CO line.
" * ," "#," "PAUSE" or "SECRET" is counted as
one digit.
Saved Number Redialing memory remains intact
until another number is stored in memory.
Operation
Storing the phone number into SNR memory
When you are speaking on the CO line or when
the called CO line is busy
1. Press the AUTO button.
2. Press the SAVE (SNR) button.
• System saves the dialed
telephone number.
3. Replace the handset or press the
SP-PHONE button.
Calling an outside party by SNR on the DN
button or the CO button
1. Press the DN button or the CO
button.
• The indicator on the pressed
button lights in green.
• You hear dial tone 1 or 3 or 4.
2. Press the SAVE (SNR)button.
• If the saved call was on the CO
Calling by SNR after dialing a feature number for
selecting a CO line
1. Press the DN button.
• The indicator on the pressed
• You hear dial tone 1 or 3 or 4.
2. Dial a feature number for
selecting a CO line.
3. Press the SAVE (SNR)button.
Interrupting redialing
While hearing busy tone, ring back tone, or
reorder tone from a CO line
1. Press the SAVE (SNR) button.
(Supplement)
SAVE button is not provided on the following
PITS telephones:
PITS type 50, KX-T7020, KX-T7030,
KX-T7050
However, the SAVE button can be assigned to
the PF1 button of the above listed PITS
telephones.
Refer to Section 9-G-1.03 "Station (3/3) and
Section 12-C-2.00 "PF (Programmable Feature)
Button Assignment" for further information.
4-C-16
button, calling on the DN
button is ineffective: pressing
the SAVE (SNR) button is
ignored.
button lights in green.