Panasonic KX-T336 System Reference Manual page 819

3.00 Mode Structure
The administration using VT compatible terminal
consists of the following modes.
Pre-entering Mode
Initial Screen
Installation Screen
Password Entry Screen
Date and Time Set Up
Screen
Main Menu Screen
Programming Main Menu
Backup Utility Main Menu
Pre-entering Mode
Consists of five screens starting from Start
Screen through Main Menu Screen.
For further details, refer to Section 7-B "Pre-
entering Mode."
Test Main Menu
Monitor Main Menu
Print Out Menu
Change Password
Change Date & Time
Restart
Exit
Programming Main Menu
Consists of 10 submenu screens and allows you
to administer system-wide programming
parameters.
For further details, refer to Section 7-C-4.00
"Programming Main Menu."
Test Main Menu Screen
Enables you to test the cards, ports, PIT's and
Attendant Consoles in on-line communication
mode.
For further details, refer to Section 7-C-5.00 "Test
Main Menu."
Monitor Main Menu
Consists of three menus and allows you to see
error log, device status and traffic
measurements.
For further details, refer to Section 7-C-6.00
"Monitor Main Menu."
Print Out Menu
Allows you to print out the system programming
parameters and traffic information.
For further details, refer to Section 7-C-7.00
"Print Out."
Change Password
Enables you to change the password for "On
Site" and "Remote."
For further details, refer to Section 7-C-8.00
"Change Password."
Change Date & Time
Enables you to change the date and time.
For further details, refer to Section 7-C-9.00
"Change Date and Time."
Backup Utility Main Menu
Consists of two submenus, and enables you to
save or load the system programming data and
attendant console database.
For further details, refer to Section 7-C-10.00
"Backup Utility."
Restart
Functions same as if you press the RESET
button.
For further details, refer to Section 7-G-2.00
"Restart."
Exit
Enables you to return to the initial screen.
For further details, refer to Section 7-G-1.00
"Exit."
7-A-3