Panasonic KX-T336 System Reference Manual page 1312

Operation chart for changing extension name
<Status 1>
<Status 2>
Note:
Pressing the END button in any status after <Status 1>
restores <Status 1>.
Pressing the SELECT button in any status after
<Status 2> restores <Status 2>.
You can also advance to the next extension
number by pressing the NEXT button and return
to the previous extension number by pressing the
PREV button.
PITS system programming
mode
SYS-PGM No?
Initial display for PITS system
programming mode
CHG Name No?
The MEMORY button indicator light goes
out.
Current contents appear on the display.
Dialed name appears on the display.
Confirmation tone sounds.
The MEMORY button indicator lights in
red.
11-C-13
Dial "0 3."
DN
• To designate the extension directory
number, dial three or four digits.
• To designate the lowest extension number,
press the NEXT button.
• To designate the highest extension number,
press the NEXT and then the PREV button.
• To set or change the extension name, dial
the new extension name.
• To correct an error entry, press the CLEAR
button and dial again.
•
• Press the MEMORY button to store the
name.
•
• To advance to the next extension number,
press the NEXT button.
• To return to the previous extension
number, press the PREV button.
• The MEMORY button indicator light goes
out.
Operation
Result from the
operation