Panasonic KX-T336 System Reference Manual page 873

11.00 AUTO CNF (Automatic
Configuration)
Description
This function sets the telephone type and DSS
consoles automatically. This function is available
in the screens where AUTO CNF is displayed in
the function field.
Extension-Station
1 COMMON 2 INDEX 3 4 READ
Operation
<Example>
When the Telephone Type is set to PITS in
Extension-Station screen and actually SLT
telephone is connected.
1. Press the F7 key.
• The following message appears at the
bottom of the screen.
Extension-Station
Station Equipment No. = 1031
Telephone Type- - - - - - PITS
Model- - - - - - - - - - - - - KX-T123250
AUTOCNF > Automatic Configuration OK? (Y: yes/N: no)=
1 2 3 4
2. Press "Y" key to execute AUTO CNF.
Y
Press "N" key not to execute AUTO CNF.
N
3. Press the Return key.
Extension-Station
Station Equipment No. = 1031
Telephone Type- - - - - - SLT
Model- - - - - - - - - - - - -
• Telephone Type changes to SLT automatically.
5 6 HRD CPY 7 AUTOCNF 8
F7
5 6 7 EXIT 8
RETURN
Operation Chart
Press the AUTOCNF key F 7
Press Y to execute Automatic Configu-
ration.
Press N not to execute Automatic
Configuration.
Then press
RETURN
Function mode ends automatically
Conditions
When Automatic Configuration operation fails,
one of the following error messages appears on
the screen.
An error message type depends on the situation.
*****ERROR : Illegal parameter
*****ERROR : Not installed
*****ERROR : Diagnostic failure
For details of the error contents, refer to Section
9-M "Error Message Tables."
Reference
The AUTO CNF function is available in the
following setting screens.
• Extension-Station (1/3)
• Extension-DSS Console (1/3)
7-J-19
.