Panasonic KX-T336 System Reference Manual page 1317

8.00 Changing Walking COS
Password
This is used to change the walking COS password
for performing Walking COS.
For further information about Walking COS, refer to
Operation
1. Set PITS system program-
ming mode.
2. Dial "0 6." (program number)
3. Dial new password: four
digits.
4. Press the MEMORY button
to store the newly dialed
password.
Section 4-C-9.00 "Walking COS (Class of
Service)."
Result
• The message appears on the
display:
SYS-PGM No ?
• The MEMORY button
indicator lights in red.
• Current password appears on
the display:
<Example>
Walk PW: 1111
• The MEMORY button
indicator light goes out.
• Dialed password appears on
the display:
<Example>
Walk PW: 5555
• The MEMORY button
indicator lights in red.
• Confirmation tone sounds.
11-C-18
Comment/Note
• Refer to Section 11-C-1.00
"Entering PITS System
Programming Mode."
• Values from 0 to 9, * , # can be
entered for the password.