Panasonic KX-T336 System Reference Manual page 566

Confirming the message sender by the message
receiver (for PITS with the display only) and
changing the calling order if multiple messages
are left (for all PITSs).
In on-hook condition or SP-PHONE off
1. Press the MESSAGE button that
is lit.
• If your PITS has a display, it
shows:
When the message sender is
an extension user:
<Example>
1234 : Tony
When the message sender is
an Attendant Console:
<Example>
ATT Console
The first caller
1
The order of
2
calling back
The last caller
3
Displaying Time and Date
<Supplement>
A MESSAGE button is not provided on the PITS's listed below, but can be
assigned to the assignable buttons respectively, as follows:
PITS not provided with MESSAGE button
KX-T30830
KX-T30820, KX-T30850
KX-T61620, KX-T61630, KX-T61650
The second
caller
Displaying the first caller
Assignable Buttons
DSS 8
DN 3
DN 6
(30393)
2. Press the MESSAGE button that
is lit again.
• If multiple messages are left,
the second message sender is
displayed. The calling order of
the first message sender
becomes the last, and the
second message sender
becomes the first.
(Note)
Repeating step 2 displays the message sender
on the display of PITS type 30 one by one in
receiving order.
The calling order also changes at the same time.
The illustration below shows the change at every
pressing of the MESSAGE button:
" " in the illustration means pressing of the
MESSAGE button.
The first caller
The second
caller
The last caller
4-I-17
The second
caller
The last caller
The first caller
Displaying the second caller