Panasonic KX-T336 System Reference Manual page 1329

1.00 DN (Directory Number)
Button Assignment
Assigning various features to the DN buttons of
individual PITS telephone is explained here.
Operation
1. Set the MEMORY switch at
the rear of PITS to
"PROGRAM."
SET• • PROGRAM
MEMORY
2. Press the appropriate DN
button.
The explanation of the message display applies
only to a PITS with the display.
Result
• The following message
appears on the display:
PITS-PGM No.?
• The MEMORY button indicator
lights in red.
• Previously stored data appears
on the display:
<Example>
DSS(DN):1011
• The MEMORY button indicator
light goes out and the
associated DN button indicator
lights in red.
• If nothing is entered within one
minute after pressing the DN
button, "Initial display for
PITS station programming
mode" is displayed again.
12-C-2
Comment/Note
• This status is called "initial
display for PITS station
programming mode."
• If the programming data of your
PITS has already been
accessed by another
administration device, the
following message appears on
the display.
Already Accessed
• From now on in any status,
pressing the END button
restores this status.
• When the following messages
appears on the display,
changing the assigned feature
is impossible in this mode, and
can be changed only by the
system programming.
<Example>
PDN:DN 1011
(Primary Directory Number)
<Example>
SDN:DN 1012
(Secondary Directory Number)
<Example>
PRV-CO:P 2021
(Private CO)
<Example>
OHCA on DN
(Off-Hook Call Announcement)
<Example>
UCD Log
(UCD Log in)
<Example>
Local Alarm
(Local Alarm)
Continued