9.10 Setting Charge Rate
Used to set the charge rate of a telephone call per meter.
Operation
1. Set Charge Management
Mode.
2. Enter "7."
3. Enter a charging rate: up to
eight digits including "."
(decimal point).
4. Press MEMORY to store the
entry.
5. Press END
Result
•
Charge Meter
<Example>
Rate: 0.23
<Example>
Rate: 1.10
• The MEMORY indicator lights
in red.
• Confirmation tone sounds.
•
PITS–PGM No?
Initial Display of PITS Station
Programming Mode.
12-C-45
(70695)
Comment/Note
• Refer to Section 12-C-9.02
"Entering Charge Management
Mode."
• Press " " key to enter a
decimal point.
• Press CLEAR to delete the
current entry and enter the
new one.