9.04 Checking/Clearing the Charge Meter–ATT
Used to check and/or clear the charge meter of an ATT (Attendant Console).
Operation
1. Set Charge Management
Mode.
2. Enter "1."
3. Enter "1" (ATT 1)or "2"
(ATT 2).
4. Press SELECT to check the
rate.
• To alternate between the rate
and the meter, press SELECT.
To reset the meter:
5. Press CLEAR.
6.Press MEMORY to store the
data change.
To check/clear another ATT:
7. Press NEXT.
To finish the operation:
8. Press END
Result
•
Charge Meter
•
ATT No.?
<Example>
ATT1: 00005
<Example>
ATT1: 00005.
ATT1: 00001.15DM
<Example>
ATT1: 00000
• The MEMORY indicator lights
in red.
<Example>
ATT2: 00020
•
PITS–PGM No?
Initial Display of PITS Station
Programming Mode.
12-C-36
(70695)
Comment/Note
• Refer to Section 12-C-9.02
"Entering Charge Management
Mode."
• You can press NEXT to go to
the lowest directory number.
• Repeat steps 4 through 5.