Panasonic KX-T336 System Reference Manual page 460

5.03 Intercom-Voice Calling
Description
Intercom-Voice Calling allows an extension user
to call another extension user in the same
Intercom group through Intercom Calling with his
voice instead of ringing.
While calling an extension, the user can change
the voice calling mode to the ringing mode by
pressing " *. " The ringing mode cannot be
changed to the voice calling mode while calling.
Programming
System Programming
"System-Numbering Plan
(06/11)",
Voice Calling Mode Set
Voice Calling Mode Cancel
Conditions
If the called extension has enabled Voice Calling
Deny, Intercom-Voice Calling results in ringing
call even though the caller sets "Voice Calling
Mode Set."
For further information about Voice Calling Deny,
refer to Section 4-D-2.02 "Intercom Answer Voice
Calling Deny."
Use PDN button to set or cancel this feature.
Operation
Setting the Voice Calling mode
1. Lift the handset or press the SP-
PHONE button.
• The indicator on the PDN
button lights in green.
• You hear dial tone 1 or 3 or 4.
2. Dial the feature number for
Voice Calling Mode Set "67 "
(default).
• You hear confirmation tone 1 or
2.
• If your PITS has a display, it
shows:
Voice Alerting
Reference
VT Dumb
9-D-6.06 10-C-10.00
4-C-19
(70695)
Canceling the Voice Calling mode
1. Lift the handset or press the SP-
PHONE button.
• The indicator on the PDN
button lights in green.
• You hear dial tone 1 or 3 or 4.
2. Dial the feature number for Voice
Calling Mode Cancel "67#"
(default).
• You hear confirmation tone 1 or
2.
• If your PITS has a display, it
shows:
Tone Ringing
Changing to the ringing mode during Intercom-
Voice Calling in the Voice Calling mode.
1. Lift the handset or press the SP-
PHONE button.
2. Press the ICM button.
3. Dial the intercom number of the
other extension.
• You hear confirmation tone 3.
• Start Intercom-Voice Calling to
the opposite party.
4. Dial " ."
• Ringing the other party starts .
• You hear ringback tone.