5.00 Storage of Set Value by PF4
Storing the entered data
1. Press the PF4 key.
• The following message appears at the bottom
of the screen:
Parameter Save OK?(Y:yes/N:no/C:cancel)
<Example>
System-Operation
Tenant Service
Automatic Route Selection
Parameter Save OK?(Y:yes/N:no/C:cancel)
Press
Y
2. Press "Y" key when storing the entered data.
Press "N" key when not storing the entered
data.
Press "C" key to cancel the entered data.
3. Press the RETURN key.
Operation (1/3)
PF4
Press the PF4 key.
The following message appears
at the bottom of the screen.
N
or
C
or
RETURN
RETURN
7-H-4
Press "Y" or "N" or "C" key.
Press the RETURN key.