Panasonic KX-T336 System Reference Manual page 628

2.02 Call Forwarding-Busy/Off-Hook
Description
Call Forwarding-Busy/Off-Hook provides
automatic call transfer to a preset destination
when the user's extension is busy or off-hook.
Incoming calls can be forwarded to extension
users, Voice Mail ports, or operators.
"FDN for General Operator Call" is used to assign
operators as the destination of Call Forwarding.
Refer to Section 9-D-1.01 "Operation (1/3)" for
further information.
The following incoming calls do not receive Call
Forwarding treatment.
• A call from doorphone
• A call routed via DIL 1: N feature
• A call directed to a UCD group
To set Call Forwarding-Busy/Off-Hook, assign
"System-Class of Service", "Call Forwarding/Do
Not Disturb" to "Yes."
To set and cancel this function, dial the feature
number for "Call Forwarding-Busy Set," and
"Call Forwarding/Do Not Disturb Cancel."
Programming
System Programming
"System-Class of Service (1/2)",
Call Forwarding/Do Not
Disturb
"System-Numbering Plan
(04/11)",
Call Forwarding-Busy Set
"System-Numbering Plan
(05/11)",
Call Forwarding/Do Not
Disturb Cancel
Reference
VT Dumb
9-D-4.01 10-C-7.00
9-D-6.04 10-C-10.00
9-D-6.05 10-C-10.00
5-D-7
(70695)
Conditions
An extension user may have only one type of
Call Forwarding/Do Not Disturb feature in effect
at any time. If a second type is assigned, the
previously assigned type is canceled.
If the extension to which calls are to be
forwarded itself is in a call forward mode, a call is
not forwarded furthermore. The call rings at the
first forwarded extension. In case of an outside
call, if not answered in a specified time period,
the call will be routed to another destination, if
available, based on the "Intercept Routing-No
Answer" feature.
If Tenant Service is employed and "Inter Tenant
Calling" is assigned to "Yes" by programming,
this function is ineffective for the calls from
another tenant if the destination of Call
Forwarding-Busy/Off-Hook is set to an Attendant
Console.
Calls from any VM extension will not be
forwarded, if forwarding destination is another
VM extension.
The following attempt will be rejected with
reorder tone.
• If Tenant Service is employed, the user cannot
set the destination to an extension in the other
tenant.
• To call the other extension whose call
forwarding destination is set to his or her own
extension.
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension users. Refer to
Section 5-G-9.00 "Remote Station Feature
Control."