Panasonic KX-T336 System Reference Manual page 1343

Operation
• To set "Idle Line Preference,"
dial "2."
• To set "Prime Line
Preference," press one of the
following buttons:
PDN
SDN
Private CO
Single CO
Group CO
ICM
4. Press the MEMORY button
to store the assignment.
5. To conclude PITS station
programming mode, slide the
MEMORY switch to "SET."
SET• • PROGRAM
MEMORY
Result
• The following message
appears on the display:
Pref. Out : Idle
<Example 1>
When pressing one of the DN
buttons, the DN number of the
pressed button appears on the
display:
Pref. Out : DN-xx
<Example 2>
When pressing the ICM button,
the following message appears
on the display:
Pref. Out : ICM
• The MEMORY button indicator
lights in red.
• Confirmation tone sounds.
• "Initial display for PITS
station programming mode" is
shown on the display.
• PITS station programming
mode is concluded and returns
to the operation mode.
12-C-16
Comment/Note
If "Idle Line Preference" is set,
the system selects an idle button
from the buttons assigned in
"System Operation", Idle Line
Preference:
DN (PDN,SDN) buttons or CO
(Private CO, Single CO, Group
CO) buttons.
• Pressing a wrong button is
cleared by pressing a correct
button.
• If an inaccessible button is
pressed, alarm tone sounds.
Continued