Panasonic KX-T336 System Reference Manual page 1309

Operation chart for changing extension number
<Status 1>
<Status 2>
Note:
Pressing the END button in any status after <Status 1>
restores <Status 1>.
Pressing the SELECT button in any status after <Status 2>
restores <Status 2>.
You can also advance to the next directory number by
pressing the NEXT button and return to the previous
directory number by pressing the PREV button.
PITS system programming
mode
SYS-PGM No?
Initial display for PITS system
programming mode
CHG DN?
The MEMORY button indicator light goes
out.
The message appears on the display to
require you to enter the new directory
number.
Dialed number appears on the display.
Confirmation tone sounds.
The MEMORY button indicator lights in
red.
11-C-10
• Dial "0 2."
DN
• To designate the extension that you want
to change, dial the directory number of the
extension : three or four digits.
• To designate the extension which has the
lowest directory number, press the NEXT
button.
• To designate the extension which has the
highest directory number, press the NEXT
button and then the PREV button.
• Dial the new directory number : three or
four digits.
• To correct a wrong entry, press the
CLEAR button and dial again.
•
• Press the MEMORY button to store the
entry.
•
• To advance to the next directory number,
press the NEXT button.
• To return to the previous directory number,
press the PREV button.
• The MEMORY button indicator light goes
out.
Operation
Result from the
operation