Panasonic KX-T336 System Reference Manual page 542

1.02 Group Paging
Description
Group Paging provides paging on the DN button
to a group of extensions specified from eight
paging groups through the built-in speakers of
their PITSs.
The Class of Service of the user's extension
determines the paging groups that can receive
paging. They are assigned to be paged by
"System-Class of Service", Station Paging
Access and also if they belong to the same
tenant as the user's extension.
See Section 3-B-7.04 "Paging Group" for details
of paging groups.
To execute Group Paging, dial the feature
number for "Station Paging" and paging group
specifying number. To answer paging, dial the
feature number for "Station Paging Answer."
Programming
System Programming
"System-Class of Service (2/2)",
Station Paging Access
"System-Numbering Plan
(03/11)",
Station Paging
Station Paging Answer
Reference
VT Dumb
10-C-8.00
9-D-4.02
9-D-6.03 10-C-10.00
4-H-3
(70695)
Conditions
Single Line Telephones (SLT's) cannot be paged.
If the designated paging group is being paged by
another page, busy tone is returned to the new
paging performer.
However, he can do paging within the range not
overlapping the previous paging range.
For instance, when paging is being done to group
1, paging groups 2 to 8 are available for new
paging.
If you hear busy tone when attempting to page,
you cannot set Automatic Callback function.
Refer to Section 4-C-6.02 "Automatic Callback-
Station" for further information.
When there is no paging group assigned to "Yes"
in "System-Class of Service", Station Paging
Access within the same tenant, the performer
hears reorder tone.
Paging is broadcast over idle speakers in SP-
PHONEs of on-hook PITS sets.