Panasonic KX-T336 System Reference Manual page 1012

Description of Assigning Items
Destination (DIL 1:N only)
Type and Number
DID Digit Modification Table Assigns the digit modification table to be used for DID calls. This allows
PBX Access Code (No
Restriction)
PBX Access Code
(Restriction)
Max. Dial No. after EFA
Signal
The following item is assignable when "Type" of the Trunk Group is set to any type other than "TIE."
CO-TIE Restriction
The following four items are assignable when "Type" of the Trunk Group is set to "TIE."
TIE-CO Restriction
TIE Forced Account
Code Mode
TIE Incoming
Delete Digit*
TIE Incoming
Insert Dial*
* Required when there is a need to modify the digits from other PBXs.
Conditions
Same as "Group-Trunk Group (1/2)" screen.
Function
The following functions appear on the function line of this setting screen.
1 COMMON 2 INDEX 3
Assigns destination type and number only when "Incoming Mode (Day)" is
set to DIL 1: N (the function which enables an incoming call from one CO
line in one trunk group to arrive at one to eight destinations simultaneously
without assistance of operator).
Orderly setting is not necessary and inserting blanks between the items is
permissible.
the DID incoming digits to be modified to match the numbering plan.
In behind PBX or Centrex operation it is necessary for the system to
send an access code to the host PBX or Centrex followed by a pause.
This feature assigns the access code to be sent.
This is the same as PBX Access Code with Pause except that the digits
following the access code are checked by the system for toll restriction.
Assigns maximum dialing digits after sending EFA (External Feature
Access) signal.
Used to restrict or not outside users from "Calling from CO to TIE."
To restrict, set to "Yes." To allow, set to "No."
Used to restrict or not extension users from "Calling from TIE to CO."
To restrict, set to "Yes." To allow, set to "No."
Used to allow certain extension users "Calling from TIE to CO."
If set to "Yes", an extension user must enter a valid tie account code
before "Calling from TIE to CO."
Used to set the number of digit to be deleted from the digits received from
other PBXs via TIE lines.
Used to set one through four digits number to be added to the digits
received from other PBXs via TIE lines.
4 READ 5 6 HRD CPY 7
9-E-11
(70695)
8