Panasonic KX-T336 System Reference Manual page 613

4.00 Call Park
4.01 Call Park-System
Description
Allows an extension user to hold a call (both
extension and outside) into a parking area
common to the system.
The parked call can be retrieved from any
extension in the system.
Call Park can be used whenever an extension
user engaged on a call needs to go elsewhere,
and wishes to complete the call from another
extension.
Call Park feature is also convenient to be used in
combination with paging feature since any
extension user can retrieve a parked call after
being paged.
20 parking areas are available common to the
system.
To execute Call Park-System, dial the feature
number for "Call Park-System."
To retrieve a call parked in the system parking
area, dial the feature number for "Call Park
Retrieve-System."
Programming
System Programming
"System-Tenant",
Call Park Boundary
"System-Numbering Plan
(04/11)",
Call Park-System
Call Park Retrieve-System
Conditions
If Tenant Service is employed, 20 parking areas
can be split between two tenants in "System-
Tenant", Call Park Boundary.
A parked call will be disconnected automatically
by the system, if it is not answered within 30
minutes.
Music on Hold will be sent to the held party if
available. For sending Music on Hold, prior
assignment is necessary. Refer to Section
3-E-1.00 "Music on Hold."
Reference
VT Dumb
9-D-2.00 10-C-5.00
9-D-6.04 10-C-10.00
5-C-4
(70695)
Operation
Parking a call to the system parking area
1. Press the switchhook for
approximately one half second
and release.
• The other party is placed on
Consultation Hold. You hear
confirmation tone 2 and then
dial tone 1 or 3 or 4.
2. Dial the feature number for Cal
Park-System "53" (default).
3. Dial the parking area number in
two digits: 01 to 20.
• When you succeed in Call Park-
System, you hear confirmation
tone 2 and then dial tone 1 or 3
or 4.
• If you fail in Call Park-System
(another call is already parked
in the specified parking area),
you hear busy tone 1 or 2.
• In this case, dialing another
parking area number (01 to 20)
allows you to try a new call park
destination.
• To talk to the party placed on
Consultation Hold again while
hearing busy tone, follow the
same procedures as retrieving
Consultation Hold. Refer to
Section 5-C-2.00 "Consultation
Hold."
4. Replace the handset.