Panasonic KX-T336 System Reference Manual page 935

1.03 Operation (3/3)
Summary
Assigns elemental data common to the whole
system, such as setting terminal type for opera-
tors, parameters for Night Service etc., through
Assigning Items
Operator 1
Operator 2
Default
ATT1 : for "with None / EXT / ATT : terminal type
ATLC" None : no operator
EXT100 : for EXT
"without ATLC" ATT
Number:assign number when terminal type is
blank : when terminal type is set to "None"
Three or four digit DN :
1 or 2 : when terminal type is set to "ATT,"
ATT 2 : for "with Same as Operator 1.
ATLC"
None : for
"without ATLC"
9-D-11
the third System-Operation screen.
(Password level : Two or higher)
Selection of Value
: setting an extension to Operator 1
: setting Attendant Console to Operator1
set to "EXT" or "ATT"
when terminal type is set to "EXT"
select Attendant Console 1 or 2
Reference
3-B-5.00
3-B-5.00
Continued