Panasonic KX-T336 System Reference Manual page 1003

Description of Assigning Items
Type
Name
Tenant
Incoming/Outgoing
Incoming Mode (Day)
Incoming Mode (Night)
Intercept Routing (Day)
Intercept Routing (Night)
Toll Restriction Level
Toll Restriction Table
Dialing Plan
CO-CO Duration Limit
Disconnect Time
Pause Time
Hook Switch Flash Time
Conditions
The assigning items:Type, Incoming Mode (Day/Night), Destination (DIL 1:N Only)
Type and Number, CO Appearance Type can be changed only when all the trunks
belonging to the trunk group are not in use. If any trunk is used, it is impossible to
change.
Tenant
Incoming Mode (Day)
Assigns a type for each trunk group.
Assigns a name to each trunk group.
Assigns the tenant to which each trunk group belongs.
Assigns each trunk group to incoming only, outgoing only, or both.
Assigns the destination for incoming calls during day service.
Assigns the destination for calls during night service.
Assigns the destination for Intercept Routing (Day).
Assigns the destination for Intercept Routing (Night).
Assigns TRLT (Toll Restriction Level of trunk group).
Assigns Area/Office code table number for Toll Restriction.
Selects the dialing plan, selecting "None" causes no Toll Restriction.
Sets the maximum duration for a CO-CO call.
Sets disconnecting time. This allows the CO time to release its resources
before another call is placed outgoing from the PBX.
Sets the pause time used in speed dialing and hook switch below.
Assigns whether Flash Service is available or not.
If available, set the hooking time (pause length).
If "—" is displayed here, "System-Operation", Tenant Service is set to
"No."
If "ATT" "DISA," "TAFAS 1" or "TAFAS 2" is selected, the followings are
checked:
ATT: Checks whether ATLC card is equipped or not.
DISA: Checks whether DISA card is equipped or not.
TAFAS 1: Checks whether "System-Operation", External Paging 1 is set
to "Yes."
TAFAS 2: Checks whether "System-Operation", External Paging 2 is set
to "Yes."
9-E-4
(70695)