Panasonic KX-T336 System Reference Manual page 938

2.00 Tenant
Summary
Assigns parameters for tenant 2, such as terminal
type for operators, method of changing Night
Service, password for PITS programming etc..
Also assigns boundaries for functions, such as
Assigning Items
Operator 1 (Tenant 2)
Speed Dialing, Call Park etc., which are split
between tenant 1 and tenant 2.
(Password level : Two or higher)
Default
None None / EXT /ATT: terminal type
None : no operator
EXT : setting an extension to Operator 1
ATT : setting Attendant Console to Operator 1
Number: Assign number when terminal type is
set to "EXT" or "ATT"
blank : when terminal type is set to "None"
Three or four digit DN:
when terminal type is set to "EXT"
1 or 2 : when terminal type is set to "ATT,"
selects Attendant Console 1 or 2
9-D-14
Selection of Value
Reference
3-B-4.00
3-B-5.00
Continued