Panasonic KX-T336 System Reference Manual page 799

9.00 Trunk Verify
Description
Allows the attendant to verify the status of
specified trunk.
The TRG key (programmable key) must be
assigned to the attendant console.
Programming
System Programming
"System-Operation", PITS
Programming Password
Attendant Management
TRG key
Conditions
The attendant can place a call by specifying a
trunk but cannot hold or transfer it.
When specified trunk is busy, busy tone sounds.
Verifying a trunk can be done only when a call is
placed from SRC side.
Operation
Reference
VT Dumb
9-D-1.03 10-C-5.00
Reference
6-C-10.00
6-J-21
1. Press an idle LOOP key.
LOOP
• The SRC indicator lights and dial
tone sounds.
2. Press the TRG key (programmable
TRG
key).
3. Dial " ."
*
4. Dial the four-digit password
(PITS programming password).
5. Dial the desired trunk port physical
number (four digits)
• Another dial tone sounds, and the
specified trunk is seized.
1 The PITS programming
password is used for PITS
programming and Trunk Verify.
2 Refer to Section 14-F-4.00
"Testing the Ports" for details
about trunk port physical
number.
1
2