Service Program Mode Tables - Ricoh AFICIO A267 Service Manual

20 September 1999

4.2.2 SERVICE PROGRAM MODE TABLES

NOTE: 1) In the Function column, comments are in italics .
2) In the Setting column, the default value is in bold letters.
3) An asterisk "*" after the mode number means that this mode is stored in
the NVRAM. If you do a RAM reset, all these SP modes will be return to
their factory settings.
4) SP4-915 to 4-941: When the SP mode name has a prefix of "P-", the
adjustment is only effective when the user selects an original type of
"Service Mode" (User Tools - General Features - 09. Image
Adjustment).
Mode No.
Class Class
1 and 2 3
Leading Edge
Registration
1
(Paper Tray Feed)
Leading Edge
1-001*
2 Registration
(By-pass Feed)
Leading Edge
3 Registration
(Duplex)
Side-to-Side
Registration
1
(1st Paper Feed)
Side-to-Side
2 Registration
(2nd Paper Feed)
Side-to-Side
Registration
3 (3rd Paper Feed:
optional PFU tray 1
1-002*
or optional LCT)
Side-to-Side
Registration
4
(4th Paper Feed:
optional PFU tray 2)
Side-to-Side
Registration
5
(By-pass Feed)
Side-to-Side
Registration
6
(Duplex)
Paper Feed Timing
(1st Paper Feed)
1-003* 1
Function
Adjusts the printing leading edge registration
from each paper feed station using the
Trimming Area Pattern (SP5-902, No.10).
Use the ó key to toggle between + and -
before entering the value. The specification
is 3 ± 2 mm. See "Replacement and
Adjustment - Copy Adjustment" for details.
Adjusts the printing side-to-side registration
from each paper feed station using the
Trimming Area Pattern (SP5-902, No.10).
Use the ó key to toggle between + and -
before entering the value. The specification
is 2 ± 1.5 mm. See "Replacement and
Adjustment - Copy Adjustment" for details.
Adjusts the paper feed clutch timing at
registration. The paper feed clutch timing
determines the amount of paper buckle at
registration. (A larger setting leads to more
buckling.)
4-5
SERVICE PROGRAM MODE
Settings
+9.0 ~ –9.0
0.1 mm/step
+0.0 mm
+12.5~–12.5
0.1 mm/step
+0.0 mm
+12.5~–12.5
0.1 mm/step
+0.0 mm
+9.0 ~ –9.0
0.1 mm/step
+0.0 mm
0 ~ 10
1 mm/step
5 mm