Controlling System Power and Viewing BIOS
Messages
This section describes how to control system power and view BIOS messages. It includes the
topics shown in the following table:
Description
Power on the server and view BIOS messages.
Power off the server if an error occurs.
Reset the server.
Powering On the Server and Viewing BIOS Messages
Use the procedures in one of the following sections to apply main power to the server and view
BIOS messages.
"Use the Power Button to Power On the Server" on page 131
■
"Use the Oracle ILOM CLI to Power On the Server" on page 132
■
"Use the Oracle ILOM Web Interface to Power On the Server" on page 133
■
"Viewing BIOS Messages" on page 133
■
Use the Power Button to Power On the Server
The power cords must be connected and the server in standby power mode before applying
Before You Begin
main power. See
"Connect the Power Cords" on page
Links
"Powering On the Server and Viewing BIOS
Messages" on page 131
■
"Powering Off the Server for Orderly
Shutdown" on page 135
■
"Powering Off the Server for Immediate
Shutdown" on page 138
"Reset the Server" on page 140
50.
Controlling System Power and Viewing BIOS Messages
131
Need help?
Do you have a question about the Sun Server X4-4 and is the answer not in the manual?
Questions and answers