Setting System And Management Power Policies (Oracle Ilom); Setting System-Wide Power Management Settings (Oracle Ilom) - Oracle X4 series Administration Manual

Table of Contents

Setting System and Management Power

Policies (Oracle ILOM)

Set system management policies in Oracle Integrated Lights Out Manager (ILOM) to meet the

power and cooling requirements for Oracle server systems in your data center. This section

describes some of the ways you can manage the energy consumption of an Oracle server

system:

Reduce power requirements for an Oracle server system without affecting the system

■

performance. For details, see

ILOM)" on page

Virtually control the behavior of host power at boot. For details, see

■

Host Power at Boot (Oracle ILOM)" on page

Satisfy cooler operating requirements for PCIe cards, or enable a cooling down period prior

■

shutting down the host. For details, see

ILOM)" on page

Force blade chassis NEMs to run SAS2 capable links at a slower rate. For details, see

■

"Forcing Blade To Be SAS2 Capable (Oracle ILOM)" on page

Set the low line AC override mode policy on Sun Server X4-4. For details, see

■

Line Power Override Mode Policy for Sun Server X4-4" on page

Setting System-Wide Power Management Settings (Oracle

ILOM)

You can change system-wide power management settings in Oracle Integrated Lights Out

Manager (ILOM) to:

Reduce server power consumption by setting a target limit. For more details

■

about configuring this property, see

SP" on page

Enforce a server power target limit by applying a power capping policy. For more details

■

about configuring this policy, see

"Setting System-Wide Power Management Settings (Oracle

103.

112.

"Set Power Target Limit Property on Server

104.

"Set Power Capping Policy on Server SP" on page