Ericsson AVP 1000 Reference Manual page 73

Input Options
Table 3.8 Input Options Parameters
Parameters Values
Input Detection Off, Auto Detect and Report, Auto Detect and
Configure Video Profile Only, Auto Detect and
Restore Saved Config
Detected Video Not Detected, SD 567i25, SD 480i29.97, HD
Standard 720p50, HD 720p59.94, HD 1080i25, HD
1080i29.97
Select Configs to be No Action
loaded on input video
Config n
detection
SD 567i25,
SD 480i29.97,
HD 720p50,
HD 720p59.94,
HD 1080i25,
HD 1080i29.97,
3G 1080p50,
3G 1080p59.94
Encode Options
Table 3.9 Encode Options Parameters
Parameters Values
Profile for SD Profile Off,
Available profiles depend on card type and
licenses
Profile for HD Profile Off,
Available profiles depend on card type and
licenses
Profile for 3G Profile Off
Available profiles depend on card type and
licenses
Input Detection is Set to Off
If Input Detection is turned off, the input video format is not monitored by the VCM.
No action is taken when there is a change in the format of the incoming native video
through the SDI/HD-SDI input, other than that specified by the output on video loss
parameter.
Input Detection is Set to Auto Detect and Report
If Input Detection is set to Auto Detect and Report, a video lock alarm is raised if the
video lock is lost on the SDI/HD-SDI input and the output on video loss setting will
apply.
EN/LZT 790 0023/1 R16A
Description
Specifies what to do when the input video format has been
changed.
The detected video standard if Input Detection is set to
other than Off. If the format is not detected or Input
Detection is set to Off, it is set to Not Detected. Read only
parameter.
Only available when Auto Detect and Restore Saved
Config is selected.
For each input format a drop down box will display all
available stored configs
Description
The profile to set when a change to an SD format has been
detected. Available only if Input Detection is set to Auto
Detect and Configure.
The profile to set when a change to an HD format has been
detected. Available only if Input Detection is set to Auto
Detect and Configure
The profile to set when a change to an 3G format has been
detected. Available only if Input Detection is set to Auto
Detect and Configure
Getting Started
3-31