Ericsson AVP 1000 Reference Manual page 261

Parameter Values
Metadata Controls Off, On
Coding Mode
Metadata source type Embedded/Decoded Auto, Serial Port (Program
1 to 8)
Metadata override None, All, Compression Profile, Dialogue
type Normalization, Comp Profile and Dial Norm
Metadata Reversion Last Used, Preset
Mode
Metadata preset type 1 to 8
Embedded PCR On, Off
Au Information Cont Off, AU Info
Advanced
Lip Sync Offset -500 to 500 ms
Gain -6 to 6dB
Language
User Language 1
User Language 2
Table 5.57 AAC-LC Parameters
Parameter Values
Bit Rate 32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224,
256, 320, 384, 448, 512
Coding Mode 2/0, 3/2L (5.1 Surround)
Embedded PCR On, Off
Au Information Cont Off, AU Info
Encapsulation MPEG2 ADTS, MPEG4 LATM/LOAS
TNS (Temporal Noise Off, On
Shaping)
Advanced
Lip Sync Offset -500 to 500 ms
Gain -6 to 6dB
EN/LZT 790 0023/1 R16A
Description
Override default coding mode with coding mode indicated
in decoder program configuration or live metadata (if
present).
Selects where live metadata comes from.
Defines which metadata parameters to override.
Determines which metadata is used upon loss of live
metadata.
Defines which metadata preset to use if Preset is selected
for Metadata Reversion Mode.
Controls whether PCR is to be embedded in the audio
PES.
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio
Configures a delay to the audio to improve A/V
synchronization.
Sets the gain in dB for the audio stream.
The language of the stream.
A custom three-character language code when User
Language 1 is set in the Language field.
A custom three-character language code when User
Language 2 is set in the Language field.
Description
Bit Rate of the audio stream. The available options depend
on the selected coding mode.
Specifies what channel configuration to use for encoding.
Controls whether PCR is to be embedded in the audio
PES.
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio
Specifies the encapsulation used for transmitting AAC
content. It can be either MPEG-2 Audio Data Transport
Stream or MPEG-4 Low Overhead Audio Stream based on
MPEG-4 Low Overhead Audio Transport Multiplex.
Turns noise shaping on or off.
Configures a delay to the audio to improve A/V
synchronization.
Sets the gain in dB for the audio stream.
Web GUI Control
5-85