Ericsson AVP 1000 Reference Manual page 249

Parameter Values
Output On Audio Loss No PID, Silence
Audio Encoding
The following parameters are available on the Encode tab of the Properties widget
on the Service Configuration page when an audio component is selected in the
Outputs widget. The same parameters can be accessed through the
Advanced/CE-a J2K/Audio Module/Audio <n>/Encode menu on the front panel.
Table 5.42 Audio Encoding Standards
Parameter Options
Coding Standard Pass-thru
Table 5.43 Pass-thru Parameters
Parameter Values
Embedded PCR On, Off
Au Information Cont Off, AU Info
Advanced
Lip Sync Offset -500 to 500 ms
Gain -6 to 6dB
Language
User Language 1
User Language 2
Audio Component
The following parameters are available on the Component tab of the Properties
widget on the Service Configuration page when an audio component is selected in
the Outputs widget. The same parameters can be accessed through the
Output/<output name>/Transport Stream ID: <n>/Service List/<service
name>/Component List/<component name> menu on the front panel.
EN/LZT 790 0023/1 R16A
Description
Specifies the action to take when input is Lost. No PID is
for dropping the audio PID from the stream, Silence is for
encode silence.
When No PID is selected, the reference to the PID is not
removed from the Program Map Table, so a Transport
Stream analyzer will indicate a ghost PID in the output
Transport Stream.
Description
Pass-thru of the input
Description
Controls whether PCR is to be embedded in the audio
PES.
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio.
Configures a delay to the audio to improve A/V
synchronization.
Sets the gain in dB for the audio stream.
The language of the stream.
A custom three-character language code when User
Language 1 is set the Language field.
A custom three-character language code when User
Language 2 is set in the Language field.
Web GUI Control
5-73