Ericsson AVP 1000 Reference Manual page 291

Parameter Values
Video Input Format HD 720p50, HD 720p59.94, HD 1080i25, HD
1080i29.97, HD 1080p50, HD 1080p59.94, HD
2160p50 Interleaved, HD 2160p59.94
Interleaved, HD 2160p50 Quad, HD 2160p59.94
Quad
Output On Video Loss Freeze Frame, Freeze with text overlay
Black, Black with text overlay
Slate with text overlay
Color Bars, Bars with text overlay
No PID
Ident Text
Upload New Logo File Browse, Upload
Logo insertion Off, On
Logo file
A fixed logo position? On, Off
The X position of the
logo
The Y position of the
logo
Upload New Slate File Browse, Upload
Video Encoding
The following parameters are available on the Encode tab of the Properties widget on the
Service Configuration page when a video component is selected in the Outputs widget.
The same parameters can be accessed through the Advanced/CE-HEVC/Video/Video
1/Video/Main Video/Video Encoder menu on the front panel.
EN/LZT 790 0023/1 R16A
Description
Defines the expected video format on the SDI input or the
video format used for encoding. A change in the Video
Input Format might result in a change in the Video Profile
used for encoding.
Repeats the last good video frame on loss of video input.
Text overlay is not supported in this release.
Switches to a black test pattern on loss of video input. Text
overlay is not supported in this release.
Switches to pre-configured text overlay on loss of video.
Switches to a color bars test pattern on loss of video input.
Text overlay is not supported in this release.
The video PID shall no longer be transmitted. The SI is not
updated.
Overlay text to display on top of images.
Browse to and upload the file to be used for the logo.
Controls if logos are displayed or not. The file to use can
be selected under Logo file.
The file to use as a logo. The selected file can be
uploaded by selecting the Upload option.
Controls whether to use the default position for overlaying
the logo on the video. Not supported in this release.
The position relative to left of the screen 0 .. (number of
pixels per video line - logo width - 1). If an invalid position
is specified, a logo display alarm will be generated.
Displayed only if A fixed logo position? is set to Off. Not
supported in this release.
The position relative to top of screen 0 .. (number of video
lines - logo height - 1). If an invalid position is specified, a
logo display alarm will be generated. Displayed only if A
fixed logo position? is set to Off. Not supported in this
release.
Browse to and upload the file to be used for the slate
Web GUI Control
5-115