Ericsson AVP 1000 Reference Manual page 252

Web GUI Control
Parameter Values
Output On Video Loss Freeze Frame, Freeze with text overlay
Black, Black with text overlay
Color Bars, Bars with text overlay
No PID
Slate, Slate with text overlay
Ident Text
MCTF Off, Default, Strong, Stronger
Adaptive Off, On
Preprocessing
Bandwidth 30 to 100 %
Half Line Removal Off, On
Logo
Logo insertion Off, On
Logo file
A fixed logo position? On, Off
The X position of the
logo
The Y position of the
logo
HD to SD Video Down-conversion
Default Aspect Ratio Anamorphic, Center Cut, Letterbox
Conversion
Use Input AFD true, false
5-76
Description
Repeats the last good video frame on loss of video input.
Text overlay is not supported in this release.
Switches to a black test pattern on loss of video input. Text
overlay is not supported in this release.
Switches to a color bars test pattern on loss of video input.
Text overlay is not supported in this release.
The video PID shall no longer be transmitted. The SI is not
updated.
A slate file uploaded by the user will be used as the video
source.
Overlay text to display on top of images.
The amount of Motion Compensated Temporal Filtering
done to improve image quality.
Adaptive PreProcessing analyses the incoming video to
tries and identify areas of noise contained within the
picture. A filter is then applied to those areas of the picture
to remove the noise. Applying the filter may remove detail
from the picture and may make edges of objects appear
soft or slightly blurred.For normal operation with high
quality input video feeds it is recommended that this option
is set to OFF.
Sets the video horizontal bandwidth filter.
Enables or disables the removal of black half lines at the
top of the picture by substituting video data from adjacent
lines. The option is available when Video Input Format is
set to SD 576i25.
Controls if logos are displayed or not. The file to use can
be selected under Logo file.
The file to use as a logo. The selected file can be
uploaded by selecting the Upload option. Not supported in
this release.
Controls whether to use the default position for overlaying
the logo on the video. Not supported in this release.
The position relative to left of the screen 0 (number of
pixels per video line - logo width - 1). If an invalid position
is specified, a logo display alarm will be generated.
Displayed only if A fixed logo position? is set to Off. Not
supported in this release.
The position relative to top of screen 0 (number of video
lines - logo height - 1). If an invalid position is specified, a
logo display alarm will be generated. Displayed only if A
fixed logo position? is set to Off. Not supported in this
release.
The down-conversion to apply when AFD is lost or AFD
code 000 is received.
Specifies whether to attempt to use AFD code at input for
format conversion or always apply the default.
EN/LZT 790 0023/1 R16A