Ericsson AVP 1000 Reference Manual page 144

Front Panel Control
Video Monitor Usage Time
Video Monitor Brightness
Key Lock Time
Default Screen on Key Lock
Default Screen Type
Carrier ID Setup
Operator
Phone Number
Longitude
Latitude
User Information
NIT Descriptor Tag
TSTD Setup
Usual Station Code
SNG HQ
SNG Provider
Remote Server Logging
Remote Server IP Address
Alarm Logging
ESAM Logging
SCTE-35 Logging
User Configuration Logging
Reflex Parameters
PCR Port
Command port
Status Port
PCR Exchange Timeout Port
4-28
The cumulative time the TND was switched on.
0-7. Sets the brightness of the TND (CMU) display.
The time in seconds after which the keyboard gets locked to prevent
accidental key presses.
When set to on the menu will return to default screen. Set to off to
remain on current screen after timeout lock.
Classic – enables the scrolling status information
Alternative disables the scrolling status
Carrier ID information for use in NIT and RF outputs.
The IP address to which system messages selected for remote
logging are sent. A value of 0.0.0.0 disables all remote logging.
Off, On. When set to On, all alarm log messages are copied to the
remote server.
Off, On. When set to On, all ESAM log messages are copied to the
remote server.
Off, On. When set to On, all SCTE-35 log messages are copied to the
remote server.
Off, On. When set to On, all user configuration changes are sent to
the remove server.
The UDP port on the current unit to which PCR Exchange Messages
are sent.
The UDP port on the current unit to which Set Rate Messages are
sent.
The UDP port on the multiplexer to which Status Messages are sent
from the current unit.
The maximum time between PCR Exchange Messages. If exceeded,
PCR Exchange Timeout Alarm is triggered.
EN/LZT 790 0023/1 R16A